Factory User Setting Operation - OKIDATA OL600e Service Manual

C.1.4

Factory User Setting Operation

• These procedures allow switching to ODA, OEL, and Non-Europe user settings .
• After executing a factory user setting operation, set the EEPROM areas which are for
other than the engine block, to the factory default values.
Note 1: units are set for the intended destination at the time of shipment from the factory.
(1) Factory ODA Setting:
Turn the power on while holding down the Menu key and the NEXT+ key.
(2) Factory OEL Setting:
Turn the power on while holding down the Menu key and the LAST- key.
(3) Factory Non-Europe Setting:
Turn the power on while holding down the Menu key and the FORM FEED key.
Diagnostics Test C - 8 OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602