Process Operation Descriptions; Hopping And Feeding - OKIDATA OL600e Service Manual

2.4.3

Process Operation Descriptions

Hopping and Feeding

Hopping and feeding motions are actuated by a single registration motor in the mechanism as
shown below.
The registration motor turning in direction "a" drives the hopping roller. The registration motor
turning in direction "b" drives the registration roller. The registration and hopping gears have
one-way bearings, so turning any of these gears in the reverse direction will not transmit the
motion to the corresponding roller.
Operation Description
Registation motor
a
b
Registration gear
Motor gear
2 - 16
Idle gear
Registration roller
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602
Hopping roller
Hopping gear