Pulse Motor (Hopping) - OKIDATA OL600e Service Manual

Pulse Motor (Hopping)

(1) Turn the printer power switch off ["O"] and remove the interface cable.
(2) Remove the paper casette 1.
(3) Open the Front cover 2, stand the High Capacity Second Paper Feeder vertically and
remove the 2 E-clamps 3.
(4) Remove the 2 levers 4, and remove the tension springs 5.
(5) Pull out the sheet guide 6 to the front.
(6) Remove the 6 screws 7, and remove the front support plate 8.
(7) Remove the connector 9 and the 2 screws 10, and remove the pulse motor 11.
Second Paper Feeder
3
5
4
E - 9
7
7
8
6
2
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602
9
10
11
1