Configuring A Group Master - Extron electronics DMP 128 User Manual

Configuring a Group Master

To configure a group:
1. Click Tools > Configure Groups (see
Configure Groups dialog.
or click View > Group Controls > Add a Group.
2. Click the Select Group drop-down list (see figure 56). The list defaults to the first
empty group. Select an empty group, or an existing group to overwrite.
Figure 56.
NOTE: <empty> groups have no group members assigned. Numbered groups
(such as <Group #1>) have controls assigned that can be overwritten.
3. In the Select Control Type panel, expand the tree for the type of control, Gain or
Mute and select the desired control type. When a selection is made, the Available
Group Members panel populates with all possible members for the selected control
type.
NOTE: Potential group members in step 4 that are already assigned to a different
group are displayed in blue.
4. In the Available Group Members panel, click the checkbox to make appropriate
selections. When a plus sign (+) exists, click to expand the tree and select individual
controls. Up to 16 group members can be added.
5. Click Apply to create or configure the group.
6. Repeat steps 2 through 5 to create or configure up to 32 groups.
7. Click Close to exit the configure groups dialog.
Configure Groups, Add Group Dialog Box
figure 55 on the previous page) to open the
DMP 128 • Software Control 85