Level Controls; Processors - Extron electronics DMP 128 User Manual

Level Controls

To access a gain, trim or volume control to view a setting, make a change, or observe a live
audio meter (input gain and output volume blocks only), double-click the gain block icon
(see figure 21). This action opens a dialog box that contains the fader for that control.
Double-click a
gain control.
A dialog box opens
containing the controls.
NOTE: In Emulate mode (the startup
mode), the input level display
is not operational.
Figure 21.
Level controls always have a control for setting the signal level and a digital indication of its
current setting. They can also have switches or indicators required for their specific function.

Processors

Each processor block represents a menu of one or more processors that can be inserted
into the audio stream. For blocks that provide more than one processor, only one can be
selected. Each block can be inserted by a double-click or right-click>Insert
then select the desired processor (see figure 22). Once a block is inserted, the selected
processor displays in the block and the block changes color. Processor blocks default to
bypassed. Bypass is different from mute since the processor passes an unprocessed signal
when in bypass mode. To have them default to "not bypassed", see
Double-click the
processor block.
Click the desired
processor.
-or-
Right-click the
processor block. Click insert.
Figure 22.
Input Level
Display
Fader Handle
Level Display
Peak
Level Control
Direct Input
Analog Input
Accessing a Typical Gain Control Dialog Box
Click to select the
desired processor.
Selecting a Processor Block
-or-
Digital Input
Tools
The selected processor is displayed in the
block.
To change processor variables, double-click the
block again to open the processor dialog box.
DMP 128 • Software Control
on page 87.
30