Extron electronics DMP 128 User Manual page 169

2 2
System Settings
Passwords
Firware Upgrade
1 1
6. Enter the requested information.
4 4
5 5
Figure 106. Download Center
7. Click Download to copy the firmware to your computer.
8. Follow the directions. The PC downloads the firmware update and starts the installation
program to extract the firmware file.
NOTE: The download folder can change depending on the operating system.
Always note the folder where the firmware file is saved.
9. Accept the license agreement and click Finish to complete the download.
To update your firmware:
1. Connect the PC to the DMP 128 via the Ethernet port.
2. Access the device using the HTML pages (see
page 156).
3.
Click the Configuration tab (see figure 108).
4. Click the Firmware Upgrade link on the Configuration page.
The current firmware version is displayed above the upload field for reference.
3 3
4 4
Current Firmware Version: 1.02
Figure 107. Firmware Upgrade Page
5. Click Browse. An Open File dialog box opens.
6. Navigate to the firmware file you downloaded and select the firmware file.
NOTE: Valid firmware files must have the file extension .S19. Any other file
extension is not a firmware upgrade. The original factory-installed firmware is
permanently available on the device. If the attempted firmware upload fails for
any reason, the device automatically reverts to the factory-installed firmware.
7. Click Open.
8. Click Upload. The firmware upload to the device can take a few minutes.
3 3
Download the Startup Page
5 5
DMP 128 • HTML Operation
on
163