Presets Drop-Down; Mode Buttons - Extron electronics DMP 128 User Manual

Presets Drop-down

This drop-down list displays up to 32 presets. Select a preset to
display and either activate (Recall), abort the selection without
either recalling or deleting (Cancel), or delete it (Delete).
NOTE: An asterisk in the drop-down list indicates a preset exists only in the DMP 128
and has not been downloaded to DSP Configurator. After recall, the asterisk is
removed.

Mode Buttons

Provides selection between Live mode and Emulate mode (see
Emulate Mode and Live Mode
Backup
In Live mode (connected to a DMP 128), when presets exist in the DMP 128 that are not
present in DSP Configurator (indicated by an asterisk next to the preset name), the function
halts and prompts the user to run a backup.
Backup (File > Backup) automates the recall of presets from the DMP 128 to a DSP
configuration (.edc) file within DSP Configurator and displays a prompt to save the file to the
hard drive. Backup is unavailable when the DSP Configurator program is in Emulate mode.
NOTE: A backup should not be performed during a live event.
on page 90).
DMP 128 • Software Control 28