Configuring A Group Master - Extron electronics DMP 64 User Manual

Configuring a Group Master

Configure a group as follows:
1. Click
Tools | Configure Groups
or click
2.
In the
defaults to the first empty group. Select an empty group if necessary, or select an
existing group to overwrite.
Figure 52.
NOTE: <empty> groups have no group members assigned. Numbered groups (such
as <Group #1>) have controls assigned that may be overwritten if selected.
3. In the
, then select the desired control type. When a selection is made in the Select
Mute
Control Types section, the
possible members for the selected control type.
NOTE: Potential group members in step 4 that are already assigned to a different
4.
In the
the checkbox(es). When a + sign exists, click to expand the tree and select individual
controls. Up to 16 group members may be added.
5.
Click the
6. Repeat steps 2 through 5 to create or configure up to 32 groups.
7. Click the
to open the Configure Groups dialog box.
and then click the
View | Group Controls
drop-down box, click a group to select it (figure 52). The list
Select Group
Configure Groups Add Group Dialog Box
section, expand the tree for the type of control,
Select Control Type
Available Group Members
group are displayed in blue.
Available Group Members
button to create or configure the group.
Apply
button to exit the configure groups dialog box.
Close
Add a Group
section populates with all
section, make appropriate selections by clicking
DMP 64 • Software Control
menu selection.
or
Gain
103