Passwords Page - Extron electronics DMP 128 User Manual

Passwords Page

Click the Passwords link to access the Passwords page (see figure 105, ).
1
1 1
2 2 3 3
4 4
Figure 105. Passwords Page
The fields on the Passwords page enter and verify administrator and user passwords.
Passwords are case-sensitive and limited to 12 upper case and lower case alphanumeric
characters. Each password (administrator and user) must be entered twice: once in the
password field (see figure 105, ) and then again in the Re-enter Password field ( ).
2 3
Characters in these fields are masked by asterisks (*****). If password protection is not
desired, leave the password fields and the re-enter password fields blank. After entering the
desired password in the releated fields, click Submit ( ).
4
NOTE: An administrator password must be created before a user password can be
created.
Change or add a password
To change a password, type the new password in both the Password and Re-enter
password fields for the desired user type and click Submit.
Clear a password
To clear an existing password so that no password is required, enter a single space in the
password and re-enter password fields and click Submit.
DMP 128 • HTML Operation 161