Configuring A Group Master - Extron electronics DMP 64 User Manual

Configuring a Group Master

Configure a group as follows:
1. Click
Tools > Configure Groups
or click
2. In the
list defaults to the first empty group. Select an empty group to begin a new group, or
select an existing group to modify.
Figure 48.
NOTE:
(such as
3. In the
or
Mute
Control Types
possible members for the selected control type.
NOTE: Potential group members in step 3 that are assigned to a different group
are displayed in blue.
4. In the
the checkbox. When a + sign exists, click to expand the tree and select individual
controls. Up to 16 group members can be added.
5. Click the
6. Repeat steps 2 through 5 to create or configure up to 32 groups.
7. Click the
View > Group Controls
drop-down box, click a group to select it (see figure 48). The
Select Group
Configure Groups Add Group Dialog Box
groups have no group members assigned. Numbered groups
<empty>
) have controls assigned that can be overwritten if selected.
<Group #1>
section, expand the tree for the type of control,
Select Control Type
, then select the desired control type. When a selection is made in the
section, the
Available Group Members
Available Group Members
button to create or configure the group.
Apply
button to exit the configure groups dialog box.
Close
to open the Configure Groups dialog box,
and then click the
Add a Group
section populates with all
section, make appropriate selections by clicking
DMP 64 • Software Control
menu selection.
Gain
Select
71