Extron electronics DMP 128 User Manual page 106

3. To move away from the highlighted block or set of sequential blocks, or to highlight
non-sequential blocks:
a. After highlighting blocks in step 2, press and hold <Ctrl> and use the navigation
keys to move to the next desired element. As long as <Ctrl> is held down, the block
moved away from is not highlighted. If the block is highlighted, it is unhightlighted.
b. Release <Ctrl>, but do not press any navigation keys.
4. To highlight another element or group of elements, repeat steps 2 and 3 as required.
5. To cut or copy, press <Ctrl+X> or <Ctrl+C>.
6. To save a preset, press <Alt+T>. The toolbar Tools menu list opens with the
Presets submenu highlighted.
7.
Press the right arrow to open the Presets submenu.
8. Press the down arrow to highlight Save Preset.
9. Press <Enter> (see figure 68).
10. The Save a Preset dialog box opens.
11. <Tab> to the preset number field and enter a specific preset number.
12.
<Tab> to the preset name field and enter a preset name.
NOTE: Unless entering a specific number and name, DSP Configurator enters
the next sequential unused preset number.
13.
<Tab> to highlight OK and press <Enter>.
+
Alt
Figure 68. Saving a Preset Using Keyboard Navigation
T Enter
DMP 128 • Software Control 100