Virtual Bus Returns, E-H - Extron electronics DMP 128 User Manual

Filter (FILT)
Filter function and interface is identical to the mic/line input channel Filter block except that
only three filters are provided (see
Dynamics (DYN)
There is one dynamics processor block available on each virtual path. Dynamics function
and interface is identical to the mic/line input channel Dynamics block,
(see Dynamics (DYN)
Loudness (LOUD)
There is one loudness processor available on each virtual path. The loudness function and
interface is identical to the Output channel Loudness block (see
page 59).
Bypass must be disengaged for the loudness processor to function. The bypass button
is red when engaged (loudness control defeated), and gray when disengaged (loudness
control active).
Delay (DLY)
Audio Delay syncs audio to video or to time-align speakers that are placed at different
distances from the listener. The Delay function and interface is identical to the input channel
delay block (see
Gain (GAIN)
Each virtual input channel gain block provides a mono long-throw fader with a - 100.0 to
+12.0 dB gain range, and a level setting readout below the fader. Fader behavior is identical
to the Pre-mix-point gain block, described in the mic/line input section
(see Pre-mixer Gain (GAIN)
while adjustments can be entered manually to 0.1 dB resolution.
Default is unmuted at unity (0.0 dB) gain.

Virtual Bus Returns, E-H

There are four additional mono virtual bus return inputs. Virtual Bus Returns E through H are
identical to A through D except there are no feedback processors.
As with virtual bus returns A through D, these returns are used when additional processing
of an input signal is required. It is also useful to apply identical filtering, dynamics processing,
loudness compensation, or signal gain/attenuation to multiple inputs.
Filter (FILT)
on page 45).
Delay (DLY) on page 50).
on page 58). Fader adjustments are in 1 dB increments,
on page 32).
Loudness (LOUD)
DMP 128 • Software Control
on
69