Extron electronics DMP 128 User Manual page 115

6. The new mic configuration is now a building block used to quickly configure new
devices (see figure 79).
Figure 79. New Device Building Block
A new configuration can also overwrite existing templates.
To Overwrite an Existing Configuration:
1. Click the desired input number box (see
2. In the dialog that opens, select the Add Block icon in the upper left (see figure 80,
2 2
Figure 80. New Device Naming
3. In the Add a Building Block dialog box, enter an existing name for the new device
(see figure 81, ).
3
3 3
4 4
Figure 81. Enter the New Name Dialog
4. Select a folder for the new device (
figure 70 on page 106).
).
4
DMP 128 • Software Control
).
2
109