Mix-Point Examples - Extron electronics DMP 128 User Manual

Mix-point Examples

In order to better understand how mix-points work, the following diagrams provide
examples of mixes.
NOTE: To simplify the diagrams not all input and output lines are shown.
Figure 45. Input 1 to Output 1
In the first example (see figure 45) input audio from Input 1 is processed and arrives at the
output 1 matrix mix-point. Double-click the mix-point to open the dialog box. When the
mix-point is unmuted, the mix junction turns teal with a light green circle to indicate the open
mix-point dialog box is the focus (see Mix-point Behavior: on page 72), and the signal
is routed to output 1.
The mix level is adjusted using the slider or by direct input of a value between - 35.0 and
25.0 dB into the dialog box below the slider.
DMP 128 • Software Control 74