Extron electronics DMP 128 User Manual page 32

• Configure Groups — Opens the Configure Groups dialog box (see
Masters on page 83).
Device Settings (live mode only) — Opens a dialog box to change the IP address,
•
set administrator and user passwords, change the device name, change the date and
time, and select the serial port baud rate.
• Network Audio Control — Launches Dante Controller to facilitate the discovery of
networked audio devices that are compliant with the network audio standard used by
the DMP 128. Discovery is invoked upon launch and retrieves the device name, audio
channels, IP address and the MAC address (see
page 119).
Phone Dialer — Opens a dialog box that provides telephone service capability for
•
answering and initiating calls to remote attendees participating in a conferencing session
Telephone Rx (DMP 128 C P and DMP 128 C P AT only)
(see
• Options — Opens a dialog box that allows customization of
the DSP Configurator appearance and operation.
Appearance — Tailor the appearance of the various
•
graphs and dialog boxes. Appearance uses a selected
color scheme for the complimentary and graph colors.
Complimentary Colors allows custom selection of
colors used with the various graphs and dialog boxes.
Graph Colors changes the row colors containing the
information and descriptions of the graphs seen in the
processor blocks.
Preferences — Contains general software options. The
•
startup splash screen contains options for selection of the
devices to connect to, or to Always ask on startup. That
selection can be changed using Default Device.
NOTE: If Show Meters is set to True, Dynamic Block Meters can be used
to tailor the appearance of the dynamics meters in order to use the full meter
to show input and gain reduction, or to show the level based on the output
and gain reduction.
Group
Dante Controller Configuration
on page 59).
DMP 128 • Software Control
on
26