Extron electronics DMP 128 User Manual page 117

Delete a Building Block
Delete a building block to remove it from the list. If you delete a default building block, you
can restore it if needed (see
To delete a building block:
1. From the main menu, select Tools > Organize
Building Blocks.
The Organize Building Blocks dialog box
opens.
2. To delete a folder and the associated building
blocks, select the folder from the list and click the
icon as shown on the right.
3. To delete an individual building block, select the
building block and click the icon or right-click the
listed building block and select Delete from the
drop-down menu.
Restore Default Building Blocks
If one of the default preconfigured building blocks
has been deleted, it can be restored. The default
building blocks are those blocks installed with
DSP Configurator. User-defined building blocks are
not affected.
To restore default building blocks:
1. From the menu, select Tools > Organize
Building Blocks. The Organize Building
Blocks dialog opens.
2. Click the Restore Default Building
Blocks icon. The default building blocks and
original folders are restored to the list.
Importing or Exporting Building Blocks
Building blocks can be imported from another computer running DSP Configurator or
exported from the current computer for use elsewhere. Building blocks files are saved with
an XML file extension.
To export a building blocks file:
1.
From the menu, select Tools > Organize
Building Blocks. The Organize Building
Blocks dialog opens.
2. Click the Export Building Blocks File
icon. The "Export to..." dialog opens.
3. Browse to the location where the file is to be
saved.
4. In the File name field, leave the current file
name or enter a new file name.
5. Click Save.
Restore Default Building Blocks below).
DMP 128 • Software Control 111