Device Manager; At (Dante) Bus - Extron electronics DMP 128 User Manual

The mic/line inputs and the virtual bus returns make up the expansion bus mix matrix that
feed EXP outputs 1 through 8 (see
They are connected to EXP inputs 1 through 8 of the secondary unit (
The primary unit EXP outputs 9 to 16 (see figure 52,
returns A – H (post processing). They are connected to EXP inputs 9 to 16 of the secondary
unit (

Device Manager

When multiple DMP 128s are connected, use the Device Manager to select the device open
in the DSP Configurator dialog box.
From the menu bar, select Tools > Device Manager to open the Device Manager
dialog shown in figure 53.
ABC D
Figure 53.
The icons function as follows:
A
B
C
D
The icons for the devices are unavailable if the device is offline.

AT (Dante) Bus

For connection and software operation of the AT bus and Dante Controller software, see
Dante Controller Software Installation
)
Ö
Device Manager Dialog
Add Device – Brings up the opening DSP Configurator connection dialog allowing the
selection of the model number of the secondary device.
Clone Device – Provides the option to duplicate the primary device configuration to
the connected secondary device.
Delete Device – Deletes the highlighted device
Expand or Collapse Device – If the device connection tree is collapsed, allows it
to be expanded. If the device tree is collapsed, expands it.
figure 52, , on the previous page) of the primary unit.
Î
) are direct feeds from virtual bus
Õ
on page 114.
DMP 128 • Software Control
), respectively.
Ï
82