Command And Response Tables; Basic Sis Commands - Extron electronics DMP 128 User Manual

Command and Response Tables

Basic SIS Commands

Command ASCII command
(host to device)
Information
requests
Firmware Version
Q
Firmware and
*Q
build version
Kernel firmware
**Q
and build
Verbose version
0Q
info
Firmware version
1Q
Bootstrap Version
2Q
Factory Firmware
3Q
Version
Updated firmware
4Q
version
An asterisk (*) after the version number indicates the currently running version. Question marks (?.??) indicate that only factory
NOTE:
firmware is loaded. A caret (^) indicates the firmware version that should be running, but a Mode 1 reset was executed and the
default factory firmware is running. An exclamation point (!) indicates corrupted firmware.
Query part number
N
Query model
I
name
Query model
1I
name
Query model
2I
description
Query system
3I
memory usage
Query user-
4I
memory usage
X(
= Version number
NOTE:
2I
response changes depending on the model number queried.
Response
(device to host)
X(]
X(]
X(]
Sum of
X(]
X(]
X( plus Web ver.-desc-
UL date/time ]
X( plus Web ver.-desc-
UL date/time ]
DMP 128: 60-1211-01
DMP 128 AT: 60-1211-10
DMP 128 C: 60-1178-01
DMP 128 C AT: 60-1178-10
DMP 128 C P: 60-1179-01
DMP 128 C P AT: 60-1179-10
V00x00
•
DMP 128
•
DMP 128
•
DMP 128
•
DMP 128
•
DMP 128
•
DMP 128
Digital•Matrix•Processor ]
#Bytes used out of #KBytes
#Bytes used out of #KBytes
Firmware version number to second decimal place (x.xx)
Version and Build number adds four digits (x.xx.xxxx)
to the Version number
Additional description
]
2Q-3Q-4Q
•
A12x08
]
• ]
• ]
AT
]
•
C
• • ]
C AT
• • ]
C P
]
• • •
C P AT
]
]
DMP 128 • SIS Programming and Control 135