Extron electronics DMP 128 User Manual page 81

Figure 46. All Inputs to Output 1
In the next example (see figure 46), input audio from all twelve mic/line inputs are processed
individually and arrive at their output 1 mix-points. As each mix-point mute button is
released, its output 1 mix-point junction turns teal, and the signals are all routed to Output 1.
Since all the signals are now on output signal line 1, open the individual mix-points to adjust
the individual signal levels for the desired balance. Open the output 1 trim, processing, or
volume blocks to change the signal levels or effects for the signals from the mix-points.
In this manner, any single input, or any number of inputs can be routed to any single output
or any number of outputs.
DMP 128 • Software Control 75