Extron electronics DMP 128 User Manual page 163

5. Press <Enter>. The device checks to see if it is password-protected.
• If the device is not password-protected, it checks and downloads the HTML pages
(proceed to step 7).
• If the device is password-protected, the device opens the Connect To dialog box (see
figure 101).
Figure 101. Connect To
6. Click in the Password field and type the appropriate administrator or user password.
Click OK.
NOTE: A User Name entry is not required.
7.
The device checks several possibilities in the following order and responds accordingly:
a. Does the address include a specific file name, such as 10.13.156.10/file_
name.HTML? If true, the device downloads that HTML page.
b. Is there a file in the device memory named "index.HTML"? If true, the device
downloads "index.HTML" as the default startup page.
c. If neither of the above conditions is true, the device downloads the
factory-installed default startup page, "nortxe_index.HTML" (see
figure 103 on the next page), also known as the System Status page.
DMP 128 • HTML Operation 157