Extron electronics DMP 128 User Manual page 114

To create a building block for the new microphone:
1. Click inside the input number box (see
The Building Blocks dialog opens.
2. Select the Add Block icon in the upper left (see figure 76,
2 2
Figure 76. Add a Building Block Dialog
The Add a Building Block dialog box opens.
3. Enter a name for the new device in the dialog box Name: field, (see figure 77,
3 3
4 4
Figure 77. New Device Naming
4. Select a folder for the new device (see figure 77,
5. Click Add (see figure 78,
5 5
Figure 78. Add a New Device
Figure 72,
1
).
4
).
5
DMP 128 • Software Control
on page 107).
).
2
).
3
108