Configuring A Group Master - Extron electronics DMP 128 User Manual

configuring a group Master

To configure a group:
1. Click Tools > Configure Groups (see figure 52 on the previous page) to open the
Configure Groups dialog.
or click View > Group Controls > Add a Group.
2. Click the Select Group drop-down list (see figure 53). The list defaults to the first
empty group. Select an empty group, or an existing group to overwrite.
Figure 53.
notE:
(such as
selected.
3. In the Select Control Type panel, expand the tree for the type of control,
Gain or Mute, then select the desired control type. When a selection is made, the
Available Group Members section populates with all possible members for the
selected control type.
notE: Potential group members in step 4 that are already assigned to a
different group are displayed in blue.
4. In the Available Group Members section, click the checkbox to make appropriate
selections. When a plus sign (+) exists, click to expand the tree and select individual
controls. Up to 16 group members can be added.
5.
Click Apply to create or configure the group.
6. Repeat steps 2 through 5 to create or configure up to 32 groups.
7. Click Close to exit the configure groups dialog.
Configure Groups, Add Group Dialog Box
groups have no group members assigned. Numbered groups
<empty>
) have controls assigned that may be overwritten if
<Group #1>
DMP 128 • Software Control 84