Extron electronics DMP 128 User Manual page 28

The entire Mic #4 input path is now identical to the Mic #1 input path including signal levels,
parameters settings, and mute/bypass selections.
Any single processor block is copied and pasted to a similar processor block in the same
or different input, virtual or output signal path. Mix-point gains can be copied from one to
another. Input gain, pre-mixer gain, post-mixer trim, and output volume can only be copied
to like gain blocks. For example, an input gain can be copied to any other input gain, but
cannot be copied to a pre-mixer gain, post-mixer trim, or output volume. Mix-point settings
can be freely copied between mix-points. The user is always asked whether they want to
overwrite the existing information. If an attempt is made to copy a processor block setting to
an incompatible block, the user is warned the action cannot be completed.
Navigation
There are two methods of navigation around the screen:
• Keyboard • Mouse
When a new DSP Configurator file is opened, the upper left element (Output #1 Trim) is the
focus by default.
Keyboard navigation
All screen elements including mix-points have the ability to receive focus using the tab and
arrow keys or using the arrow keys following a single click (see Keyboard Navigation on
page 98).
Mouse navigation
Left-click — Click on a processor block to bring focus to the block, as well as other
elements such as tabs, sliders, check boxes associated with the block. Other left-click
actions follow the Windows standard. In this user guide, "click" always refers to a left-click of
the mouse button.
Right-click — A single right-click on a block brings up a context menu specific to that
processor block. Other right-click actions follow the Windows standard.
Double-click — Double-click on a box to open it from either the focused or unfocused
state of an element.
DMP 128 • Software Control 22