Chapter B8 Reading The Event Log; Overview - GE NetworX V3 Installation Manual

Chapter B8

Overview

Figure 28. Maintenance Mode menu structure
18.1 Zone Status
18.2 Log Review
18.3 Mand. Event Log
18.4
Alarm Memory
18.5 Service Check
18.6
Detector Reset
Light Control
18.7
18.8
Advanced Menu
The event log displays the details of all the events that occur from when you turn the system on. A
maximum of 512 events are held in the event log.
To read the event log:
Press OK at the system prompt and enter your installer code.
1.
Navigate with the
2.
Scroll to Log Review and press OK.
3.
The last event added to the log is shown. The > symbol indicates that the message must
4.
be scrolled horizontally.
Press F5 (
Event description explains each part of the event description.
Alarm P3 Warehouse
17:32 25/09 48>
•
In this case, an alarm occurred in zone 48 (with the assigned zone name Office) in
partition 3 (with the assigned partition name Warehouse) at 17:32 on September 25.
No report was sent to the central station. This is the twenty-eighth event in the log.
Press the
5.
Reading the event log
keys to Maintenance Mode and press OK.
) to scroll to the right and view the rest of the event description. Table 36
Press F5 (
keys to scroll through the events in the log.
NetworX Version 3 Installation Manual
Warehouse
)
48 Office 028
237