GE NetworX V3 Installation Manual page 163

Partition Settings and System Settings groups of the Control Panel menu. These settings affect all the
keypads in the system or all the keypads in the partition. For example to cancel the keypad exit
buzzer completely for all the keypads:
Navigate with the
1.
Scroll to System Settings>Feature Select>Miscellaneous>Silent Exit Always.
2.
Use the
3.
The keypad beeps once to accept the change and returns to Silent Exit Always.
4.
You can also silence the particular keypad. The following options cancel the exit buzzer and chime
on the current keypad only:
Navigate with the
1.
Select Keypad Features>Silent Keypad and press OK.
2.
Use the
3.
The keypad beeps once to accept the change and returns to Silent Keypad.
4.
To set advanced buzzer options for the keypad on partition 1, when exit delays are set to 20 seconds
and 10 seconds respectively:
Navigate with the
1.
Scroll to Partition Settings>Partition 1>Timers>Exit Time 1 and press OK.
2.
Type 20 and press OK.
3.
The keypad beeps once to accept the change and returns to Exit Time 1.
4.
Scroll to Partition Settings>Partition 1>Timers>Exit Time 2 and press OK.
5.
Type 10 and press OK.
6.
The keypad beeps once to accept the change and returns to Exit Time 2.
7.
Navigate with the
8.
Scroll to Keypad Features>Advanced Options>Buzzer On Exit>Exit Time 1.
9.
Use the
10.
The keypad beeps once to accept the change and returns to Exit Time 1.
11.
Scroll to Keypad Features>Advanced Options>Buzzer On Exit>Exit Time 2.
12.
Use the
13.
The keypad beeps once to accept the change and returns to Exit Time 2.
14.
This setting will cancel the final confirmation beep at the end of the exit time, and cause the keypad
to beep slowly for the first 10 seconds and then to beep fast for the last 10 seconds of the exit delay
countdown.
Note: This option works for the Arm Away mode only; for the Arm Stay mode the keypad is always silent.
The keypad buzzer behaviour depends on both Buzzer On Exit>Exit Time 1 and Buzzer On Exit>Exit
Time 2 settings, and is described in the following table:
keys to Control Panel and press OK.
keys to change the status to Yes and press OK.
keys to This Keypad and press OK.
keys to change the status to Yes and press OK.
keys to Control Panel and press OK.
keys to This Keypad and press OK.
keys to change the status to enabled and press OK.
keys to change the status to disabled and press OK.
NetworX Version 3 Installation Manual
163