Programming Partition Parameters - GE NetworX V3 Installation Manual

122
NetworX Version 3 Installation Manual
Location 82 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if "End
Downloading Reporting" is enabled. Segment 1 and 2 are reserved. Segment 3 contains the tens digit
of the "End Download Reporting". Segment 4 contains the ones digit of the "End Download
Reporting".
Note: A start download report will be sent to the internal event log.
For a 3+1 format, only the segment 1 digit (tens) will be sent.
LOCATION 83 - CANCEL COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (1 segments,
numerical data)
Location 83 contains the tens digit for a 4+2 and 3+1 format that will be sent if "Cancel Reporting" is
enabled. Segment 1 contains the tens digit for the "Cancel Communicator Reporting". The ones digit
is the ones digit of the user number that did the opening. If the user is greater than 9, the numbers will
begin repeating (e.g. code 6 = 6, code 45 = 5).
If you need to report Cancels with a unique code per user, Contact ID or SIA format must be used.
LOCATION 84 - BUS FAULT AND BUS FAULT RESTORE COMMUNICATOR CODES, SLOW SPEED
FORMATS ONLY (4 segments, numerical data)
Location 84 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if "Short
circuits and ground faults" reporting is enabled. Segment 1 contains the tens digit of the "Bus Fault
Reporting". Segment 2 contains the ones digit of the "Bus Fault Reporting". Segment 3 contains the
tens digit of the "Bus Fault Restore". Segment 4 contains the ones digit of the "Bus Fault Restore".
For a 3+1 format, only the segment 1 digit resp. segment 3 digit (tens) will be sent.
LOCATIONS 85-87 - RESERVED

Programming partition parameters

Locations 88-109 are for programming different account codes and/or features for each partition. If a
location is left unprogrammed, the feature for partition 1 and the account code for the phone number
will be used.