Configuring System Features; Setting Arm Schedules - GE NetworX V3 Installation Manual

Enter 5 and press OK.
4.
The keypad beeps once to confirm the change and returns to Internal Siren Timeout.
5.

Configuring system features

You can specify various system features, enable the tests that can be performed on the control panel
and set clock options. The following example programs the control panel to activate the siren and
make a manual test call to the central station during the do self tests.
Ensure the advanced menu is enabled.
1.
Navigate with the
2.
OK.
Scroll to Diagnostics>Manual Siren Test>Enabled and press OK.
3.
The keypad beeps once to confirm the change and returns to Manual Siren Test.
4.
Scroll to Manual Dialer Test>Enabled and press OK.
5.
The keypad beeps once to confirm the change and returns to Manual Dialer Test.
6.

Setting arm schedules

Figure 22. Arm Schedules menu
Arm Only After Close
2.7.1
Auto Arm
2.7.2
Auto Disarm
2.7.3
2.7.4 Schedule Times
The control panel can be programmed to automatically disarm (open) and arm (close) partitions at
specified times on specified days. To program auto-arm schedules, you must enable the advanced
keys to Control Panel>System Settings>Feature Select and press
(1) Partition 1
2.7.1.1
Partitions 2 - 4
Same as above
2.7.1.1.3
2.7.1.1.4
2.7.1.1.5
2.7.1.1.6
(1) Partition 1
2.7.2.1
Partitions 2 - 4
Same as above
(1) Partition 1
2.7. .1 3
Partitions 2 - 4
Same as above
2.7. .1.3
2.7. .1.4
2.7. .1.5
2.7. .1.6
Opening
2.7. .1 4
Closing/Autoarm
2.7. .2 4
NetworX Version 3 Installation Manual
Sunday
2.7.1.1.1
Monday
2.7.1.1.2
Tuesday
Wednesday
Thursday
Friday
Saturday
2.7.1.1.7
Sunday
2.7.2.1.1
Monday
2.7.2.1.2
Tuesday
2.7.2.1.3
Wednesday
2.7.2.1.4
Thursday
2.7.2.1.5
Friday
2.7.2.1.6
Saturday
2.7.2.1.7
45 Minute Retry
2.7.2.1.8
Sunday
2.7. .1.1 3
Monday
2.7. .1.2 3
Tuesday
3
Wednesday
3
Thursday
3
Friday
3
Saturday
2.7. .1.7 3
Hour
2.7. .1.1 4
Minute
2.7. .1.2 4
Hour
2.7. .2.1 4
Minute
2.7. .2.2 4
69