GE NetworX V3 Installation Manual page 159

Navigate with the
5.
Batteries option in User Menu is available only when keypad partitions are disarmed and
when the This Keypad>Keypad Features>Battery Change Allowed menu option (in the
Installer Menu) is set to Yes.
Open the backlight battery compartment as described above.
6.
Unscrew two screws inside the backlight battery compartment as shown below.
7.
Open the operating battery compartment and replace all four batteries. You have 5
8.
minutes to finish this operation. You must use Duracell or Energizer "AA" batteries only.
keys to Change Batteries and press OK. Note, that Change
NetworX Version 3 Installation Manual
159