Option 1: Panel Voice; Option 2: Account Number; Option 3: Primary Phone Number; Option 4: Secondary Phone Number - GE CareGard Installation Instructions Manual

Option 1: Panel Voice

When Panel Voice is set to ON and Option 21 is set to 2, the panel
announces "Press again for emergency call, or press STATUS to cancel."
When this option is turned OFF, no announcements are made by the panel.

Option 2: Account Number

The Account Number option allows you to program a 10-character alpha-
numeric account number. Press the red numbered buttons to enter the
desired account number.
To enter a letter, press 9 and the Minutes + button to program letters A-F. If
you delete the option, the account number default is set to 00000.
Note
Do not use A in an account number if Option 10 or 11 is set to Contact ID.

Option 3: Primary Phone Number

For monitored systems, the Primary Phone Number option allows you to
program a phone number (up to 26 digits) for the central monitoring station.
Deleting this option sets the option default to OFF.
When programming the Primary Phone Number, press Add to enter a *
symbol; press Delete to enter a # symbol; press Test to enter a pause.
Note
A primary phone number must be programmed for ETL listed systems.

Option 4: Secondary Phone Number

The Secondary Phone Number option allows you to program a phone
number (up to 26 digits) for pager/voice event notification or the central
monitoring station. Deleting this option sets the option default to OFF.
When programming the Secondary Phone Number, press Add to enter a *
symbol; press Delete to enter a # symbol; press Test to enter a pause.

Option 5: Numeric Pager/Voice Event Notification

Option 5 allows you to program a phone number (up to 26 digits) for a
numeric pager or voice event notification system. Deleting this option sets
the option default to OFF.
When programming the Numeric Pager/Voice Event Notification, press Add
to enter a * symbol; press Delete to enter a # symbol; press Test to enter a
pause.
Note
After entering the numeric pager, you may also have to enter up to five pauses for
Option 5 to properly work.
If the panel fails to report to a numeric pager, try adding a pause until the system
reports to the pager.
Programming Options
Range = On/Off (Default = On)
¾
To program Panel Voice:
1. Press Add or Delete.
2. Press Option #.
3. Press 0, then 1.
4. Press Done.
Range = 0-9, A-F (Default = 00000)
¾
To program an Account Number:
1. Press Add.
2. Press Option #.
3. Press 0, then 2.
4. Enter the Account Number.
5. Press Done.
Range = 26 Digits (Default = Off)
¾
To program a Primary Phone Number:
1. Press Add or Delete.
2. Press Option #.
3. Press 0, then 3.
4. Enter the Primary Phone Number and use
Add, Delete, and Test as necessary.
5. Press Done.
Range = 26 Digits (Default = Off)
¾
To program a Secondary Phone Number:
1. Press Add or Delete.
2. Press Option #.
3. Press 0, then 4.
4. Enter the Secondary Phone Number use
Add, Delete, and Test as necessary.
5. Press Done.
Range = 26 Digits (Default = Off)
¾
To program a Numeric Pager/Voice Event
Notification:
1. Press Add or Delete.
2. Press Option #.
3. Press 0, then 5.
4. Enter the Pager/Voice Event Notification
Number and use Add, Delete, and Test as
necessary.
5. Press Done.
10