Chapter B6 Setting Up The Gsm/Gprs Module (Nx-7002); Overview; Enrolling The Gsm/Gprs Module - GE NetworX V3 Installation Manual

Chapter B6

Overview

In case you want to add GSM/GPRS functionality to the panel, you need to use an NetworX V3
model which has the GSM/GPRS on-board or you need to add a separate NX-7002 module. Only one
GSM/GPRS module can be used and will have module number 78. The GSM/GPRS module features
include:
•
Wireless event reporting.
•
12 configurable report destinations.
•
Selectable reportable events from four partitions.
•
Compatible with PSTN or ISDN reporting.
•
PSTN/ISDN can be used as backup.
•
SIA reporting using TCP/IP over GPRS.
•
XSIA reporting using TCP/IP over GPRS.
•
Contact ID reporting using TCP/IP over GPRS.
•
Contact ID or SIA reporting formats over SMS.
•
HomeText (plain language) SMS reporting.
•
SIA reporting with optional partition modifiers using SMS messages.
•
XSIA reporting using SMS text messages.
•
Control panel can use GSM in addition to PSTN (reporting all panel protocols using
GSM).
•
Wireless upload/download using GSM CSD connection.
•
Wireless upload/download using a GPRS connection.
•
Upload/download may be initiated remotely or locally.
•
Optional automatic download sessions. These normally follow test calls. Test call
reporting can be switched off so that there is automatic download calls without test
report calls.
•
Provides backup for the panel and external dialers.

Enrolling the GSM/GPRS module

When you select the enrol modules process, the GSM/GPRS module is enrolled on both the control
panel and the keypad. The keypad must enrol the module in order to display the relevant menu
Setting up the GSM/GPRS
module (NX-7002)
NetworX Version 3 Installation Manual
191