Concluding Steps - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

Ê Reconnect all cables to the system board. For a complete cabling overview,
please refer to section
9.3.4

Concluding steps

Perform the following steps:
"Installing the server node in the server enclosure" on page 63
Ê
Ê If applicable, reconnect all external cables.
"Switching on the server node" on page 64
Ê
"Using the Chassis ID Prom Tool" on page 81
Ê
"Updating or recovering the system board BIOS and BMC" on page 67
Ê
applicable)
"Verifying the system time settings" on page 75
Ê
Ê Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
on page 80.
Ê After replacing the system board in a server running Linux OS, update the
MAC address of the onboard network controller in the related NIC definition
file as described in section
environment" on page
"Enabling boot watchdog functionality" on page 74
Ê
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing the system board" on page
CX250 S2
"Cabling overview" on page
"Looking up changed MAC / WWN addresses"
"Updating the NIC configuration file in a Linux
77.
Upgrade and Maintenance Manual
System board and components
246.
82.
(if
243