Removing An Expansion Card - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

6.3.2.3

Removing an expansion card

Figure 46: Removing an expansion card (A)
Ê Remove two screws from the riser module (1).
Ê Carefully remove the riser module from the chassis (2).
Ê If applicable, remove SFP+ transceiver modules from the expansion card,
as described in section
page 97.
CX250 S2
Expansion cards and battery backup units
"Removing an SFP+ transceiver module" on
Upgrade and Maintenance Manual 107