Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual page 232

System board and components
V
CAUTION!
Never not try to fix bent contact springs. Doing so may result in loss
of electrical performance and reliability.
Removing heat sinks and processors from the defective system board
module
Ê Remove the heat sinks on the defective system board as described in
section "Removing processor heat sinks" on page
Ê Carefully remove the processors from their sockets on the defective system
board as described in section
V
CAUTION!
Remove and reinstall one processor at a time. Do not remove the
second processor from the defective system board until the first
processor has been installed on the new system board.
232
"Removing the processor" on page
Upgrade and Maintenance Manual
188.
192.
CX250 S2