Required Tools; Preliminary Steps - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

System board and components
Safety notes
V
CAUTION!
The CMOS battery must be replaced with an identical battery or with
●
a battery type recommended by the manufacturer.
Keep lithium batteries away from children.
●
Do not throw batteries into the trash can. Lithium batteries must be
●
disposed of in accordance with local regulations concerning special
waste.
For further safety information, please refer to section "Environmental
●
protection" in the PRIMERGY CX250 S2 Operating Manual.
Ensure to insert the CMOS battery the with the positive pole
●
facing up!
9.1.1

Required tools

Preliminary and concluding steps: tool-less
●
Main steps: tool-less; recommended: tooth pick
●
9.1.2

Preliminary steps

Perform the following procedures:
Ê Locate the desired server with the ID button.
"Shutting down the server node" on page 45
Ê
Ê If applicable, remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 46
Ê
210 Upgrade and Maintenance Manual
CX250 S2