Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual page 233

Installing processors on the new system board module
Figure 136: Installing the processor
Ê Hold the processor with your thumb and index finger.
Ê Make sure that the four notches on the processor align with the posts on the
socket (see close-up).
Ê Lower the processor straight down without tilting or sliding it in the socket.
V
CAUTION!
– Ensure that the processor is level in the socket.
– Be careful not to touch or bend the pins on the processor socket.
CX250 S2
Upgrade and Maintenance Manual
System board and components
233