Removing The Slot Bracket - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

6.3.1.3

Removing the slot bracket

Figure 43: Removing the slot bracket
Ê Remove one screw from the slot bracket (1).
I
Save the screw for installing!
Ê Remove the slot bracket (2).
V
CAUTION!
Keep the slot bracket for further use.
Always replace slot brackets into the unused PCI slot openings to
comply with applicable EMC regulations and satisfy cooling
requirements.
CX250 S2
Expansion cards and battery backup units
Upgrade and Maintenance Manual 103