Table of Contents
Advertisement
Appendix
11.2.2.4 LAN indicators
Figure 157: LAN indicators
No Indicator
1
LAN speed
2
LAN
link/transfer
I
Depending on the settings in the BIOS, the standard LAN connector 1
may also be used as a service LAN connector. You will find further
information in the "D3196 BIOS Setup Utility for PRIMERGY CX250 S2"
Reference Manual.
262
Description
For System LAN
Steady yellow signal in the event of a LAN transfer rate
of 1 Gbit/s
Steady green signal in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
For Management LAN:
Steady yellow signal in the event of a LAN transfer rate
of 100 Mbit/s
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Upgrade and Maintenance Manual
CX250 S2
Advertisement
Table of Contents
