Removing The 10 Gbt Mezzanine Card; Concluding Steps - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

6.4.5.3

Removing the 10 GbT mezzanine card

Figure 57: Removing the 10 GbT mezzanine card
Ê Remove three screws from mezzanine card bracket.
Ê Disconnect the mezzanine card from the linking board.
6.4.5.4

Concluding steps

Perform the following procedures:
"Installing the mezzanine card bracket" on page 49
Ê
"Installing the server node in the server enclosure" on page 63
Ê
"Switching on the server node" on page 64
Ê
CX250 S2
Expansion cards and battery backup units
Upgrade and Maintenance Manual 127