Installing An Expansion Card - Fujitsu PRIMERGY CX250 S2 Upgrade And Maintenance Manual

Expansion cards and battery backup units
6.3.1.4

Installing an expansion card

Ê Remove the expansion card from its protective packaging.
I
For further instructions regarding controller settings, please refer to
the accompanying documentation.
Ê If applicable, attach the required slot bracket to the expansion card as
described in section
Ê If applicable, reinstall SFP+ transceiver modules on the new expansion
card, as described in section
page 92.
Figure 44: Installing the expansion card (A)
Ê Insert the expansion card into the riser module (1).
Ê Secure the expansion card with one screw (2).
104
"Mounting expansion card slot brackets" on page
"Installing SFP+ transceiver modules" on
Upgrade and Maintenance Manual
86.
CX250 S2