Creating Gateway To Gateway Vpn Tunnels With The Wizard - NETGEAR SRXN3205 - ProSafe Wireless-N VPN Firewall Wireless Router Reference Manual

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual

Creating Gateway to Gateway VPN Tunnels with the Wizard

You can configure multiple gateway VPN tunnel policies through the VPN Wizard. You can also
set up multiple remote VPN client policies through the VPN Wizard.
To set up a gateway VPN Tunnel using the VPN Wizard:
1. Select VPN > IPsec VPN from the main/submenu.
2. Click the VPN Wizard tab and the VPN Wizard screen displays.
To view the wizard default settings, click the VPN Default values link. You can modify these
settings after completing the wizard.
Figure 6-1
3. Select Gateway as your VPN tunnel connection.
4. Create a Connection Name. Enter an appropriate name for the connection. This name is not
supplied to the remote VPN endpoint. It is used to help you manage the VPN settings.
5. Enter a Pre-shared Key. The key must be entered both here and on the remote VPN gateway,
or the remote VPN client. This key should be minimum of 8 characters and should not exceed
49 characters. This method does not require using a CA (Certificate Authority).
6-2 Virtual Private Networking Using IPsec
v1.0, October 2008