View And Disconnect Active Users - NETGEAR ProSafe SRX5308 Reference Manual


To view the VLAN Status screen:
Select Monitoring > Router Status > VLAN Status. The VLAN Status screen displays:
Figure 168.
The following table explains the fields of the VLAN Status screen:
Table 71. VLAN Status screen information
Item
Profile Name
VLAN ID
MAC Address
Subnet IP
DHCP Status
Port Membership

View and Disconnect Active Users

The Active Users screen displays a list of administrators, IPSec VPN, and SSL VPN users
that are currently logged in to the VPN firewall.

To display the list of active VPN users:
Select Monitoring > Active Users. The Active Users screen displays:
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Description
The unique name for the VLAN that you have assigned on the Add VLAN Profile screen
(see Configure a VLAN Profile
The identifier for the VLAN that you have assigned on the Add VLAN Profile screen (see
Configure a VLAN Profile on page 59).
VLANs can have the same MAC address as the associated LAN port or can be assigned
a unique MAC address, depending on the selection that you have made on the LAN
Advanced screen (see Configure VLAN MAC Addresses and LAN Advanced Settings
page 64). If a VLAN is configured but disabled, the MAC address displays as
00:00:00:00:00:00.
The IP address and subnet mask that you have assigned on the Add VLAN Profile screen
(see Configure a VLAN Profile
The DHCP status for the VLAN, which can be either DHCP Enabled or DHCP Disabled,
depending on the DHCP configuration that you have specified on the Add VLAN Profile
screen (see Configure a VLAN Profile
The ports that you have associated with the VLAN on the Add VLAN Profile screen (see
Configure a VLAN Profile on page 59).
Monitoring System Access and Performance
on page 59).
on page 59).
on page 59).
281
on