Replacing The Fusing Unit - Konica Minolta bizhub C450 Service Manual

3. Periodical check
3.6.4

Replacing the Fusing Unit

NOTE
• Before replacing the Fusing Unit, ensure that it has had time to cool down.
[2]
[1]
[3]
[4]
[5]
34
1. Turn OFF the main power switch and
unplug the power cord from the
power outlet, then wait for about 20
minutes.
2. Open the Right Door.
3. Remove the Screw [1], and remove
the Connector protective cover [2].
4036fs2046c0
4. Remove the Connector [3].
4037F2C015DA
5. Remove the Exit Tray.
☞ 51
6. Remove wire saddle and remove two
Connectors [4] of Fusing unit.
[4]
4036fs2048c1
7. Remove two Screws [5], and remove
the Fusing unit [6].
[6]
4036fs2049c0
Field Service Ver. 1.0 Mar. 2005