Close Fuser Door; Close Top Cover - Xerox Phaser 3600 Service Manual

Close Fuser Door

Close Top Cover

Phaser 3600 Printer Service Manual
Troubleshooting Reference Table
Applicable Parts
Fuser Assembly, PL1.4.1
Main Board, PL1.1.19
Switched Mode Power Supply
(SMPS), PL1.1.29.2
Step Action and Questions
1. Visually inspect the fuser door
close tab for damage.
Is the tab broken?
2. Is the sensor and actuator on the
Fuser operating correctly.
3 Is the Printer operational?
Troubleshooting Reference Table
Applicable Parts
Top Cover, PL1.4.1
Main Board, PL1.1.19
Troubleshooting Procedure Table
Step Action and Questions
1. Visually inspect the top cover and the
top cover actuator.
Is the Top Cover or actuator
damaged?
2. Use diagnostics to test the Cover
Open Board.
Does the Cover Open board function
properly?
Wiring and Plug/Jack Map References
"LSU and Main Motor to Main Board
Wiring Diagram" on page 9-16
"Map 2- Main Board" on page 9-5
"Map 3- SMPS Board" on page 9-6
Yes No
Replace the Fuser Go to Step 2.
(page 7-54) then
go to Step 3.
Replace the Main Replace the Fuser
Board (page 7-54) then
(page 7-39). go to Step 3.
Complete Replace the SMPS
(page 7-76).
Wiring and Plug/Jack Map References
"Map 2- Main Board" on page 9-5
Yes No
Replace the Top Go to Step 2.
Cover (page 7-10).
Replace the Main Replace the
Board Cover Open
(page 7-39). Board
(page 7-74).
Error Messages
3-19