Atm Ifconfig - THOMSON TG576 v7 Reference Manual

atm ifconfig

Modify an ATM interface.
SYNTAX:
atm ifconfig
where:
intf
dest
qos
clp
clpthresh
encaps
fcs
ulp
retry
40
intf = <{atm_Internet}>
[dest = <{}]>
[qos = <{default}]>
[clp = <{0|1|classification}]>
[clpthresh = <number{0-15}]>
[encaps = <{llc|vcmux}]>
[fcs = <{disabled|enabled|auto}]>
[ulp = <{mac|ip|ppp}]>
[retry = <number{0-65535}]>
The name of the ATM interface to configure.
The WAN destination for this ATM interface.
Typically, a phonebook entry.
The name of a qosbook entry defining the QoS
parameters for the WAN link.
The mode used to determine the CLP bit value.
Priority class threshold where CLP becomes 0
(for all classes >= threshold).
The WAN protocol encapsulation to be used on
this interface.
Whether or not to include the Ethernet
FCS in the packet header (only used for llc
encapsulation for mac).
The upper layer protocol.
The number of times the WAN connection setup
should retry before giving up.
atm Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20071119-0014 v1.0