Robotis Comprehensive Kit Robot Series Quick Start Manual page 16

Comprehensive Kit Robot Series
◎ Download Troubleshooting
If the users see error messages while downloading a program, take the following steps.
[ Types of Error Message ]
[Troubleshooting Step 1] Make sure CM-5 is connected to the PC.
(Troubleshooting Step 2) Make sure CM-5 power is on.
(Troubleshooting Step 3) Close the programs that are using the communication port and try it again.
(Troubleshooting Step 4) Set up correct communication port number.
※ To find the correct communication port number, refer to "Finding the Serial
COM Port Number of the PC" from "3. Bioloid Operation and Maintenance."
After setting up correct
communication port number, try
the connection again by clicking
"Connect CM-5."
16