MotoSAT J1 User And Installation Manual page 66

A new DOS window will open with DATASTORM % prompt.
Type "help" after % symbol to see all of the available Telnet commands.
Telnet Screen
WARNING!
Except for the Telnet Commands listed below making adjustments
to any of the commands could cause the J1 Controller to not function properly.
It is recommended that you export your current Configuration and Sat Table files
before making any changes to the commands listed above.
WARNING!
Some adjustments to the commands listed above may cause
damage to the antenna mount if not adjusted under the supervision of MotoSAT
Technical Support. 1-800-247-7486
Proceed
The following Telnet Commands are used for diagnostics.
help
66