MotoSAT J1 User And Installation Manual page 55

Upgrade Firmware
When complete the Screen will display Upgrade Firmware Complete and the J1
Controller will restart in about 15 seconds.
Upgrade Firmware
In about 15 to 30 seconds the HTML main Status Page should open.
Upgrade Firmware thru J1 Front Panel
From the J1 Satellite Antenna Controller Front Panel there are several Ethernet IP options
available to perform a Firmware Upgrade.
Firmware Upgrade with Configured IP Address
While holding down the Search button and then pressing the Power
button and holding both for approximately one second, will cause the J1
Controller to power up in Boot Mode using the current configured Local
IP Address. See Network Settings, Local Address.
Open your Browser to the current Configured IP Address. The Upgrade
Firmware Page should open.
Follow steps in HTML Upgrade Firmware above to complete Firmware
Upgrade.
in process
Complete
55