MotoSAT J1 User And Installation Manual page 12

Satellite Selector Screen
The Sensors and Satellite Status located on the lower part of the screen will
display the Antenna Mount position and the current Satellite information while the
Search is in progress.
System Status Screen
Under normal search conditions the J1 Controller will search for a Reference
Satellite(s) that is near the true southern part of the sky based upon the current
GPS Longitude.
The arrow above is showing the current default
satellite in the Drop Down box.
The Default Satellite is created in Search
Settings. (Satellite Longitude)
By clicking on the Down Arrow in the Drop
Down box, a list of all available satellites will
Appear in the Sat Table window.
The size and order of these satellites can be
configured Search Settings. See Search
settings.
After highlighting the desired satellite in the Sat
Table window, clicking the Search button will
begin the search for the selected satellite.
Drop Down Table
Searching Sky
12