MotoSAT J1 User And Installation Manual page 43

To see the performance of this Dish Mount;
 Open a telnet session
 Type "showdebug"
 Type "testdish"
 Data will show the performance of all 3 motors (Az, El, and Sk)
Defined Values are as follows;
[12:34:56]
A
V
W
T
L
P
A
123.45
Telnet Testdish
DATASTORM % showdebug
DATASTORM % testdish
[22:52:43] Motor is active.
[Time] A-current, V-volts, W-watts, T-torque run, L-torque set, P-PWM, A-Az
[22:52:43] A 0.59, V 4.411, W 2.615, T 0.08, L 0.45, P 30, A 155.89
[22:52:44] A 0.97, V 6.081, W 5.957, T 0.24, L 0.45, P 31, A 155.89
[22:52:44] A 1.00, V 5.246, W 5.274, T 0.25, L 0.45, P 32, A 155.89
[22:52:44] A 1.16, V 5.246, W 6.086, T 0.31, L 0.45, P 33, A 155.89
[22:52:44] A 1.18, V 5.604, W 6.645, T 0.32, L 0.45, P 34, A 155.89
[22:52:44] A 0.90, V 5.783, W 5.218, T 0.21, L 0.45, P 35, A 155.89
[22:52:55] A 1.28, V 10.01, W 12.91, T 0.37, L 0.45, P 106, A 224.94
[22:52:55] A 1.08, V 10.55, W 11.42, T 0.28, L 0.45, P 107, A 224.94
[22:52:55] A 0.61, V 10.43, W 6.455, T 0.09, L 0.45, P 108, A 224.94
[22:52:55] A 0.90, V 11.14, W 10.05, T 0.21, L 0.45, P 109, A 224.94
[22:52:55] A 1.03, V 11.26, W 11.61, T 0.26, L 0.45, P 110, A 224.94
[22:52:56] A 1.03, V 10.96, W 11.31, T 0.26, L 0.45, P 111, A 233.33
[22:52:56] A 1.00, V 11.32, W 11.38, T 0.25, L 0.45, P 112, A 233.33
[22:52:56] A 1.18, V 11.08, W 13.15, T 0.32, L 0.45, P 113, A 233.33
[22:52:56] A 1.03, V 11.32, W 11.68, T 0.26, L 0.45, P 114, A 233.33
[22:52:56] A 0.90, V 10.85, W 9.790, T 0.21, L 0.45, P 115, A 233.33
= Time Stamp (hh:mm:ss)
= motor current (amps)
= motor DC volts (volts)
= motor power (watts)
= input motor torque (in/lbs)
=set torque run (in/lbs)
=running PWM value (0 to 511)
= AZ, E=EL, S=SK
=current position in degrees
Showdebug
43