MotoSAT J1 User And Installation Manual page 35

V (vertical) polarized. Select the correct voltage scheme to fit the
application.
LNB A 22 KHz Tone
When applicable the 22 KHz Tone is used to switch the LO Oscillator
Frequency from one frequency to another. This allows the system to see
multiple satellite bands at the same Longitude location.
A Dual Band LNB or Co-Pol Feed Assembly with 2 LNB's and a 22 KHz
switch is required.
This function can be used in special search mode applications.
LNB B Configuration
When the system requires a second LNB for either finding secondary (Reference)
satellites or for peaking on the Target Satellite LNB B should be used.
Use LNB A as the primary LNB (modem LNB) when either one or two LNB's
are used.
Configure LNB B as necessary for proper operation.
LNB B LO Frequency
See LNB A LO Frequency for details and information. Modify as
necessary for the second LNB.
LNB B Power
See LNB A Power for details and information. Modify as necessary for
the second LNB.
LNB B 22 KHz Tone
See LNB A 22 KHz Tone for details and information. Modify as
necessary for the second LNB.
(Disabled)
(10750)
(18)
(Disabled)
35